Cable Support Rack is used to extend racks away from the wall to avoid obstruction or water
Cable Support Rack is used to extend racks away from the wall to avoid obstruction or water.
Cable Support rack should be located so that connectors (splice joints) between horizontal runs fall between the support point and quarter point of the span. The Support Span should not be greater than the straight section length. SnapTrack tray standard 20’ lengths.
For different raw materials, there are different processes. For the angle steel, the process involves cutting, punching, welding, and bending. For the steel rod, the process is hot forged.
Cable support Rack are used to mount cable racks away from the wall because of obstructions, limited space, or water seepage. These supports are also used to mount cable racks at corner locations where necessitated by minimum cable bend radii.
1) The hot-forged part is with more strength than the casting part, and the size is more accurate.
2) Hot Ddip galvanized as per ASTM A123 / A153.
3) Uniform on the size and high breaking load to guarantee the stable. When you working with Taporel Electrical, the specialty and service will impress you so much.
|Coating||Galvanized, ASTM A-153|