Power line fitting is also named pole line accessories or pole hardware fitting, it is an important component of the pole line
construction.Most of the fittings in the operation of the need to bear greater tension, and some also ensure good electrical
contact, it is related to the safety of the wire or tower, even if a damage, may also cause line failure.Therefore, the quality,
correct use and installation of the fittings have a certain impact on the safe power transmission of the circuit.
Post Insulator End Fitting, Flange/ Base Fitting
Hot dip galvanization 100 μ m-200 μ m
Exported country :
USA, Argentina, Italy, Hungary, Brazil, India, Germany , South Africa
Ply-wooden box, or as customized
Composite/ Ceramic Post Insulator End Fitting
1.Ensure that the conductor and insulators are suspended at their correct positions.
2.Ensure that cables remain stable despite the external vagaries of nature such as wind and storm.
3.Complete the connection of different powerline components
4.Can be used to enhance the safety of the powerline.
5.There could be many other roles that are performed by powerline accessories.
1)The hot-forged part is with more strength than the casting part, and the size is more accurate.
2) Raw material forged steel which is new and no recycles.
3) Uniform on the size and high breaking load to guarantee the stable. When you working with Taporel Electrical, the specialty and service will impress you so much.
Flang end Fitting
|Type||Composite insulator end fitting|